Monday, July 18, 2016

Paint Island Cabinets in Kitchen

I just recently finished up on a kitchen island project.  The job was to change the color of the island and provide a better quality preforming paint job.  This island had been painted twice before and the painting was not done by a professional so it looked like it needed some attention.  Also a clear coat had been applied over the previous paint job but it was a polyacrylic and using a clear polyacrylic for kitchen cabinets is not a great idea.  I use a waterborne urethane for my kitchen cabinet projects and it is a much better choice.

You might wonder what the difference is as they both have water in the name.  My understanding is this, a polyacrylic is just like a can of paint but without any colorant in it at all.  So when it dries it is clear but not any harder or better than regular acrylic paint ( regardless of what the can says ).  A waterborne urethane is achieved by first dissolving the urethane in alcohol then using water to carry the urethane.  Once the water dries you are left with a urethane finish which is way harder and nicer than an acrylic finish.  Oil urethanes will yellow over time but waterborne will not.

The product I use to clear coat my kitchen cabinets jobs is made by Varathane and here is a picture of the can.  It is actually made to use on floors so using it for cabinets makes for really strong protection.


You might be thinking, "Why clear coat the cabinets in the first place.  Just use a good paint or an oil based paint and be done with it."  Well here is the answer.  If you where to paint your kitchen cabinets and give them the best paint job possible when family and friends saw them they would naturally want to touch them.  Then they would say, "Man, you did a great job painting your kitchen cabinets."  But when you use a good clear coat like the one I use when family and friends touch them they say, "Wow, you bought new cabinets."  It's that big of a difference in look and feel and just as big a difference in performance too.

The first three photos show the cabinets before I got there.  The homeowners wanted them a darker warm gray.  Plus the existing paint job because it was sealed with a polyacrylic had gotten dirty and chipped.


Look at the left side of the cabinets and you can see the dirty marks and chipping.




I usually take off the doors to prep them and paint them.  This island had been painted twice before and showed it.  Instead of trying to sand them down I used a stiff scraper and was able to scrape off all the previous paint and get it down to the original white color.  The island was painted with a latex or acrylic paint before but never primed and that is why I could scrape it off.  If it had been primed before painting I do not think I could have scraped off the paint.

It was big mess to get the paint off but worth the effort.  After I scraped the paint off I sanded the cabinets lightly with a 220 grit and they came out smooth as can be.


 For the framework in the kitchen I had to scrape it there.  What a giant mess all the tiny flakes made.


You can see the texture here in this next photo that was on the island cabinets.  This got this way because of the application of the paint and clear sealer.  Once I got all the paint off and sanded they were really smooth.


The next four photos show the completed project.  The new dark color goes really great with the countertops and backsplash.








2 comments:

  1. Robert, the polyacrylic satin i have used seems to shiny. Is this product a lower sheen? Also do you find it makes the dark paint much darker? Thanks

    ReplyDelete
  2. Any clear coat will make the paint appear a little darker if the clear coat has some higher sheen to it. The clear coat in the photo above will make the paint very slightly darker. What it does is it actually brings out the color more.

    The product above is a nice satin sheen but still has decent sheen to it.

    If you want to control the sheen to suit you and get a real low sheen but still have a good clear coat product use 'Stays Clear' from Benjamin Moore. This is what I do all the time. I get a quart of satin Stays Clear and a quart of flat Stays Clear and them mix them together. Start with 3 parts satin and 1 part flat. That usually gives me the beautiful satin I want.

    If that is still too shiny for you just add some more of the flat but I will tell you as far as sheen goes the flat is way stronger than the satin. In other words it takes way less flat to influence the outcome of the mix than it does the satin.

    If you use the Stays Clear get some of the Ben Moore extender also to add to give you a more 'open' time.

    One other thing I would like to point out is that the varathane also comes in a quart http://www.homedepot.com/p/Varathane-1-qt-Clear-Satin-Water-Based-Indoor-Polyurethane-Case-of-2-200241H/202057137 and you can get it in a satin.

    You mentioned that you used a polyacrylic. I never use polyacrylic clear coats. They just don't work nearly as good as a waterborne polyurethane. The difference is that a polyacrylic is basically just a can of paint without any pigment in it. And it give you no better protection than paint will.

    A water borne polyurethane is made by suspending urethane particles in alcohol first then adding water. So when the water dries after you apply it you are left with a much harder and durable urethane finish.

    The stays clear and varathane are urethanes but water borne ones not oil. The still have the same durable qualities and are a way better choice for cabinets than any polyacrylic out there. Way better.

    Hope this helps.

    ReplyDelete